{
  "schemaVersion": "1.0",
  "dateUpdated": "2026-09-09",
  "pageUrl": "https://yunjunxingcabletray.com/en/quality/2026-test-reports/",
  "reportDate": "2026-08-28",
  "testStandard": "JB/T 10216-2025",
  "issuer": {
    "name": "Guangzhou Quality Inspection and Testing Institute",
    "originalName": "广州质量检验研究院"
  },
  "inspectedCompany": {
    "name": "Guangzhou Yunjunxing Yongyu Cable Tray Co., Ltd."
  },
  "brandShownOnReports": "云星 / Yunxing",
  "documents": [
    {
      "reportNumber": "JCWT20260082800",
      "product": "Galvanized-sheet cable tray",
      "specification": "100 × 50 × 1.0 mm",
      "inspectionMethod": "Sampling inspection by the institute at the inspected company's warehouse; 2 m sample from a 1,000 m sampling base",
      "conclusion": "The inspected items conform to the requirements of JB/T 10216-2025",
      "measuredHighlights": [
        "Sheet thickness 1.0 mm (requirement ≥1.0 mm)",
        "Average zinc coating thickness 19.1 μm (requirement ≥12 μm)",
        "Deflection 5.9 mm at a 2 m span and 0.5 kN/m UDL (requirement ≤10 mm), with no permanent deformation"
      ],
      "scopeNote": "This report covers cable tray made from galvanized sheet. Its 19.1 μm average zinc result is not evidence for a 65/86 μm after-fabrication hot-dip galvanized specification.",
      "pdf": "https://yunjunxingcabletray.com/downloads/reports/2026/gqt-jcwt20260082800-galvanized-sheet-cable-tray.pdf"
    },
    {
      "reportNumber": "JCWT20260082803",
      "product": "Spray-coated cable tray",
      "specification": "200 × 100 × 1.2 mm",
      "inspectionMethod": "Sampling inspection by the institute at the inspected company's warehouse; 2 m sample from a 1,000 m sampling base",
      "conclusion": "The inspected items conform to the requirements of JB/T 10216-2025",
      "measuredHighlights": [
        "Sheet thickness 1.2 mm (requirement ≥1.2 mm)",
        "Average coating thickness 93.8 μm (requirement ≥60 μm)",
        "Coating adhesion grade 1 (requirement: not below grade 2)",
        "Deflection 3.6 mm at a 2 m span and 0.5 kN/m UDL (requirement ≤10 mm), with no permanent deformation"
      ],
      "scopeNote": "The 93.8 μm result is the average coating thickness of this spray-coated sample, not zinc coating or HDG thickness.",
      "pdf": "https://yunjunxingcabletray.com/downloads/reports/2026/gqt-jcwt20260082803-spray-coated-cable-tray.pdf"
    },
    {
      "reportNumber": "JCWT20260082804",
      "product": "Aluminum cable tray",
      "specification": "100 × 100 × 1.2 mm",
      "inspectionMethod": "Sampling inspection by the institute at the inspected company's warehouse; 2 m sample from a 1,000 m sampling base",
      "conclusion": "The inspected items conform to the requirements of JB/T 10216-2025",
      "measuredHighlights": [
        "Sheet thickness 1.2 mm (requirement ≥1.2 mm)",
        "24 h neutral salt spray: appearance rating RA 10 and protection rating Rp 10",
        "Deflection 4.3 mm at a 2 m span and 0.5 kN/m UDL (requirement ≤6.7 mm), with no permanent deformation"
      ],
      "scopeNote": "Use the conclusion only for the sample, specification, items and inspection method identified in the report.",
      "pdf": "https://yunjunxingcabletray.com/downloads/reports/2026/gqt-jcwt20260082804-aluminum-cable-tray.pdf"
    },
    {
      "reportNumber": "JCWT20260088256",
      "product": "Aluminum ladder cable tray",
      "specification": "220 × 150 × 2.3 mm",
      "inspectionMethod": "Entrusted inspection of a client-supplied 2 m sample; mechanical safe working load assessed to the requested Grade A",
      "conclusion": "The inspected items conform to the requirements of JB/T 10216-2025",
      "measuredHighlights": [
        "Measured thickness 2.3 mm (requirement ≥1.5 mm for this width range)",
        "24 h neutral salt spray: appearance rating RA 10 and protection rating Rp 10",
        "Deflection 2.3 mm at a 2 m span and 0.5 kN/m UDL (requirement ≤6.7 mm), with no permanent deformation"
      ],
      "scopeNote": "Use the conclusion only for the sample, specification, items and inspection method identified in the report.",
      "pdf": "https://yunjunxingcabletray.com/downloads/reports/2026/gqt-jcwt20260088256-aluminum-ladder-tray-220.pdf"
    },
    {
      "reportNumber": "JCWT20260088262",
      "product": "Aluminum ladder cable tray",
      "specification": "420 × 150 × 2.3 mm",
      "inspectionMethod": "Entrusted inspection of a client-supplied 2 m sample; mechanical safe working load assessed to the requested Grade AA",
      "conclusion": "The inspected items conform to the requirements of JB/T 10216-2025",
      "measuredHighlights": [
        "Measured thickness 2.3 mm (requirement ≥2.0 mm for this width range)",
        "24 h neutral salt spray: appearance rating RA 10 and protection rating Rp 10",
        "Deflection 4.38 mm at a 2 m span and 1.0 kN/m UDL (requirement ≤6.7 mm), with no permanent deformation"
      ],
      "scopeNote": "Use the conclusion only for the sample, specification, items and inspection method identified in the report.",
      "pdf": "https://yunjunxingcabletray.com/downloads/reports/2026/gqt-jcwt20260088262-aluminum-ladder-tray-420.pdf"
    },
    {
      "reportNumber": "JCWT20260088263",
      "product": "Aluminum ladder cable tray",
      "specification": "620 × 150 × 2.3 mm",
      "inspectionMethod": "Entrusted inspection of a client-supplied 2 m sample; mechanical safe working load assessed to the requested Grade B",
      "conclusion": "The inspected items conform to the requirements of JB/T 10216-2025",
      "measuredHighlights": [
        "Measured thickness 2.3 mm (requirement ≥2.2 mm for this width range)",
        "24 h neutral salt spray: appearance rating RA 10 and protection rating Rp 10",
        "Deflection 5.7 mm at a 2 m span and 1.5 kN/m UDL (requirement ≤6.7 mm), with no permanent deformation"
      ],
      "scopeNote": "Use the conclusion only for the sample, specification, items and inspection method identified in the report.",
      "pdf": "https://yunjunxingcabletray.com/downloads/reports/2026/gqt-jcwt20260088263-aluminum-ladder-tray-620.pdf"
    }
  ],
  "interpretationNotes": [
    "The first three documents are institute sampling inspections at the inspected company's warehouse; the three aluminum ladder reports are entrusted tests of client-supplied samples.",
    "All six reports state that the inspected items conform to JB/T 10216-2025. The conclusions must not be extended to every size or batch.",
    "The 19.1 μm galvanized-sheet result and the 93.8 μm spray-coating result cover different finish systems; neither is batch evidence for a 65/86 μm HDG requirement."
  ],
  "publicContact": {
    "name": "Manager Zeng",
    "telephone": "+86 18902233161",
    "email": "645088276@qq.com"
  }
}